Hematology analyzer Hs Code

Hematology analyzer harmonized system code

Product Overview The hematology analyzer classified under HS Code 902789 is a sophisticated medical diagnostic instrument designed for quantitative analysis of blood components, including red blood cells, white blood cells, hemoglobin concentration, hematocrit, and platelet counts. Typically constructed with robust materials such as stainless steel and high-grade polymers, these analyzers feature automated sample processing capabilities, multi-parameter analysis, and integrated data management systems. Physical specifications generally range from compact benchtop models weighing approximately 15-30 kilograms to larger floor-standing units, offering throughput capacities between 30 to over 200 samples per hour. Within HS Code 902789, subcategories encompass differential hematology analyzers, automated cell counters, and manual counting devices, each distinguished by their processing complexity and clinical application scope. Commercially, these analyzers serve critical roles in hospital laboratories, blood banks, pharmaceutical quality control, and biomedical research facilities. Their value proposition lies in delivering precise, reproducible hematological data with high throughput and minimal operator intervention, thereby enhancing diagnostic efficiency and compliance with clinical laboratory standards. HS Code Classification & Trade Specifications HS Code 902789 falls under Chapter 90 (Optical, Photographic, Cinematographic, Measuring, Checking, Precision, Medical or Surgical Instruments and Apparatus), Heading 9027 (Instruments and apparatus for physical or chemical analysis), and Subheading 9027.89 (Other instruments for physical or chemical analysis, not elsewhere specified). This classification is justified due to the analyzer’s function of performing automated blood constituent analysis through physical and chemical measurement principles. Trade considerations include packaging in anti-static, shock-absorbent materials within climate-controlled containers to maintain instrument calibration integrity during transit. Preservation involves moisture control and temperature regulation typically between 15°C and 30°C to prevent component degradation. Shipping often requires compliance with international hazardous materials regulations if reagents accompany the device. Quality standards adhered to include ISO 13485 certification for medical devices and conformity with the World Trade Organization’s Technical Barriers to Trade (TBT) Agreement to ensure uniform customs clearance. Accurate HS code classification facilitates streamlined customs processing, tariff determination, and trade compliance across jurisdictions.

Hematology analyzer Chapter Note

1.- This Chapter does not cover : (a) Articles of a kind used in machines, appliances or for other technical uses, of vulcanised rubber other than hard rubber (heading 40.16), of leather or of composition leather (heading 42.05) or of textile material (heading 59.11); (b) Supporting belts or other support articles of textile material, whose intended effect on the organ to be supported or held derives solely from their elasticity (for example, maternity belts, thoracic support bandages, abdominal support bandages, supports for joints or muscles) (Section XI); (c) Refractory goods of heading 69.03; ceramic wares for laboratory, chemical or other technical uses, of heading 69.09; (d) Glass mirrors, not optically worked, of heading 70.09, or mirrors of base metal or of precious metal, not being optical elements (heading 83.06 or Chapter 71); (e) Goods of heading 70.07, 70.08, 70.11, 70.14, 70.15 or 70.17; (f) Parts of general use, as defined in Note 2 to Section XV, of base metal (Section XV) or similar goods of plastics (Chapter 39); however, articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences are to be classified in heading 90.21; (g) Pumps incorporating measuring devices, of heading 84.13; weight-operated counting or checking machinery, or separately presented weights for balances (heading 84.23); lifting or handling machinery (headings 84.25 to 84.28); paper or paperboard cutting machines of all kinds (heading 84.41); fittings for adjusting work or tools on machine-tools or water-jet cutting machines, of heading 84.66, including fittings with optical devices for reading the scale (for example, “optical” dividing heads) but not those which are in themselves essentially optical instruments (for example, alignment telescopes); calculating machines (heading 84.70); valves or other appliances of heading 84.81; machines and apparatus (including apparatus for the projection or drawing of circuit patterns on sensitised semiconductor materials) of heading 84.86; (h) Searchlights or spotlights of a kind used for cycles or motor vehicles (heading 85.12); portable electric lamps of heading 85.13; cinematographic sound recording, reproducing or re-recording apparatus (heading 85.19); sound-heads (heading 85.22); television cameras, digital cameras and video camera recorders (heading 85.25); radar apparatus, radio navigational aid apparatus or radio remote control apparatus (heading 85.26); connectors for optical fibres, optical fibre bundles or cables (heading 85.36); numerical control apparatus of heading 85.37; sealed beam lamp units of heading 85.39; optical fibre cables of heading 85.44; (ij) Searchlights or spotlights of heading 94.05; (k) Articles of Chapter 95; (l) Monopods, bipods, tripods and similar articles, of heading 96.20; (m) Capacity measures, which are to be classified according to their constituent material; or (n) Spools, reels or similar supports (which are to be classified according to their constituent material, for example, in heading 39.23 or Section XV).2.- Subject to Note 1 above, parts and accessories for machines, apparatus, instruments or articles of this Chapter are to be classified according to the following rules : (a) Parts and accessories which are goods included in any of the headings of this Chapter or of Chapter 84, 85 or 91 (other than heading 84.87, 85.48 or 90.33) are in all cases to be classified in their respective headings; (b) Other parts and accessories, if suitable for use solely or principally with a particular kind of machine, instrument or apparatus, or with a number of machines, instruments or apparatus of the same heading (including a machine, instrument or apparatus of heading 90.10, 90.13 or 90.31) are to be classified with the machines, instruments or apparatus of that kind; (c) All other parts and accessories are to be classified in heading 90.33. 3.- The provisions of Notes 3 and 4 to Section XVI apply also to this Chapter. 4.- Heading 90.05 does not apply to telescopic sights for fitting to arms, periscopic telescopes for fitting to submarines or tanks, or to telescopes for machines, appliances, instruments or apparatus of this Chapter or Section XVI; such telescopic sights and telescopes are to be classified in heading 90.13. 5.- Measuring or checking optical instruments, appliances or machines which, but for this Note, could be classified both in heading 90.13 and in heading 90.31 are to be classified in heading 90.31. 6.- For the purposes of heading 90.21, the expression “orthopaedic appliances” means appliances for : - Preventing or correcting bodily deformities; or - Supporting or holding parts of the body following an illness, operation or injury. Orthopaedic appliances include footwear and special insoles designed to correct orthopaedic conditions, provided that they are either (1) made to measure or (2) mass-produced, presented singly and not in pairs and designed to fit either foot equally. 7.- Heading 90.32 applies only to : (a) Instruments and apparatus for automatically controlling the flow, level, pressure or other variables of liquids or gases, or for automatically controlling temperature, whether or not their operation depends on an electrical phenomenon which varies according to the factor to be automatically controlled, which are designed to bring this factor to, and maintain it at, a desired value, stabilised against disturbances, by constantly or periodically measuring its actual value; and (b) Automatic regulators of electrical quantities, and instruments or apparatus for automatically controlling non-electrical quantities the operation of which depends on an electrical phenomenon varying according to the factor to be controlled, which are designed to bring this factor to, and maintain it at, a desired value, stabilised against disturbances, by constantly or periodically measuring its actual value.