Paper tags - paper hang tags Hs Code

Paper tags - paper hang tags harmonized system code

Product Overview Paper Tags, commonly referred to as Paper Hang Tags, classified under HS Code 482110, are flat, lightweight labeling components primarily composed of cellulose-based paperboard or kraft paper. These tags typically measure between 30mm to 100mm in width and length, with thickness ranging from 150 to 300 gsm to ensure durability and print fidelity. Produced through die-cutting, embossing, and surface finishing processes such as matte or gloss lamination, these tags exhibit high tensile strength and resistance to tearing. The classification 482110 encompasses various subcategories, including plain paper tags, pre-printed tags, and tags with reinforced eyelets or string attachments. Widely utilized across food service labeling, apparel retail tagging, inventory control, and packaging identification within processing industries, these paper hang tags enable efficient product tracking and consumer information dissemination. Their competitive advantage lies in cost-effective production, recyclability, and compliance with environmental standards, making them a preferred choice for businesses prioritizing sustainable packaging solutions. HS Code Classification & Trade Specifications The HS Code 482110 falls under Chapter 48 (Paper & Paperboard; Articles of Paper Pulp), Heading 4821 (Paper or Paperboard Labels of All Kinds), with Subheading 482110 specifically denoting “Labels, Not Printed” or printed paper tags used for labeling purposes. This classification is justified by the product’s material composition—predominantly paper—combined with its functional role in identification and information conveyance on merchandise. Commercial packaging for Paper Tags typically involves moisture-resistant polybags or carton boxes to prevent degradation during transit, adhering to international preservation protocols. Shipping is generally conducted under standard dry conditions, with humidity controls as necessary to maintain dimensional stability and print integrity. Quality standards align with ISO 9001 for production consistency and ISO 14001 for environmental management, ensuring compliance with WTO trade requirements and customs documentation mandates. Accurate classification under 482110 facilitates streamlined customs clearance, tariff determination, and harmonized trade reporting across importing and exporting entities globally.

Paper tags - paper hang tags Chapter Note

1.- For the purposes of this Chapter, except where the context otherwise requires, a reference to “paper” includes references to paperboard (irrespective of thickness or weight per m²). 2.- This Chapter does not cover : (a) Articles of Chapter 30; (b) Stamping foils of heading 32.12; (c) Perfumed papers or papers impregnated or coated with cosmetics (Chapter 33); (d) Paper or cellulose wadding impregnated, coated or covered with soap or detergent (heading 34.01), or with polishes, creams or similar preparations (heading 34.05); (e) Sensitised paper or paperboard of headings 37.01 to 37.04; (f) Paper impregnated with diagnostic or laboratory reagents (heading 38.22); (g) Paper-reinforced stratified sheeting of plastics, or one layer of paper or paperboard coated or covered with a layer of plastics, the latter constituting more than half the total thickness, or articles of such materials, other than wall coverings of heading 48.14 (Chapter 39); (h) Articles of heading 42.02 (for example, travel goods); (ij) Articles of Chapter 46 (manufactures of plaiting material); (k) Paper yarn or textile articles of paper yarn (Section XI); (l) Articles of Chapter 64 or Chapter 65; (m) Abrasive paper or paperboard (heading 68.05) or paper- or paperboard-backed mica (heading 68.14) (paper and paperboard coated with mica powder are, however, to be classified in this Chapter); (n) Metal foil backed with paper or paperboard (generally Section XIV or XV); (o) Articles of heading 92.09; (p) Articles of Chapter 95 (for example, toys, games, sports requisites); or (q) Articles of Chapter 96 (for example, buttons, sanitary towels (pads) and tampons, napkins (diapers) and napkin liners). 3.- Subject to the provisions of Note 7, headings 48.01 to 48.05 include paper and paperboard which have been subjected to calendering, super-calendering, glazing or similar finishing, false water-marking or surface sizing, and also paper, paperboard, cellulose wadding and webs of cellulose fibres, coloured or marbled throughout the mass by any method. Except where heading 48.03 otherwise requires, these headings do not apply to paper, paperboard, cellulose wadding or webs of cellulose fibres which have been otherwise processed. 4.- In this Chapter the expression “newsprint” means uncoated paper of a kind used for the printing of newspapers, of which not less than 50 % by weight of the total fibre content consists of wood fibres obtained by a mechanical or chemi-mechanical process, unsized or very lightly sized, having a surface roughness Parker Print Surf (1 MPa) on each side exceeding 2.5 micrometres (microns), weighing not less than 40 g/m² and not more than 65 g/m², and applies only to paper : (a) in strips or rolls of a width exceeding 28 cm; or (b) in rectangular (including square) sheets with one side exceeding 28 cm and the other side exceeding 15 cm in the unfolded state. 5.- For the purposes of heading 48.02, the expressions “paper and paperboard, of a kind used for writing, printing or other graphic purposes” and “non perforated punch-cards and punch tape paper” mean paper and paperboard made mainly from bleached pulp or from pulp obtained by a mechanical or chemi-mechanical process and satisfying any of the following criteria : (A) For paper or paperboard weighing not more than 150 g/m2 : (a) containing 10 % or more of fibres obtained by a mechanical or chemi-mechanical process, and1. weighing not more than 80 g/m2, or 2. coloured throughout the mass; or (b) containing more than 8 % ash, and 1. weighing not more than 80 g/m2, or 2. coloured throughout the mass; or (c) containing more than 3 % ash and having a brightness of 60 % or more; or (d) containing more than 3 % but not more than 8 % ash, having a brightness less than 60 %, and a burst index equal to or less than 2.5 kPa·m2/g; or (e) containing 3 % ash or less, having a brightness of 60 % or more and a burst index equal to or less than 2.5 kPa·m2/g. (B) For paper or paperboard weighing more than 150 g/m2 : (a) coloured throughout the mass; or (b) having a brightness of 60 % or more, and 1. a caliper of 225 micrometres (microns) or less, or 2. a caliper of more than 225 micrometres (microns) but not more than 508 micrometres (microns) and an ash content of more than 3 %; or (c) having a brightness of less than 60 %, a caliper of 254 micrometres (microns) or less and an ash content of more than 8 %. Heading 48.02 does not, however, cover filter paper or paperboard (including tea-bag paper) or felt paper or paperboard. 6.- In this Chapter “kraft paper and paperboard” means paper and paperboard of which not less than 80 % by weight of the total fibre content consists of fibres obtained by the chemical sulphate or soda processes. 7.- Except where the terms of the headings otherwise require, paper, paperboard, cellulose wadding and webs of cellulose fibres answering to a description in two or more of the headings 48.01 to 48.11 are to be classified under that one of such headings which occurs last in numerical order in the Nomenclature. 8.- Headings 48.03 to 48.09 apply only to paper, paperboard, cellulose wadding and webs of cellulose fibres : (a) in strips or rolls of a width exceeding 36 cm; or (b) in rectangular (including square) sheets with one side exceeding 36 cm and the other side exceeding 15 cm in the unfolded state. 9.- For the purposes of heading 48.14, the expression “wallpaper and similar wall coverings” applies only to : (a) Paper in rolls, of a width of not less than 45 cm and not more than 160 cm, suitable for wall or ceiling decoration : (i) Grained, embossed, surface-coloured, design-printed or otherwise surface-decorated (for example, with textile flock), whether or not coated or covered with transparent protective plastics; (ii) With an uneven surface resulting from the incorporation of particles of wood, straw, etc.; (iii) Coated or covered on the face side with plastics, the layer of plastics being grained, embossed, coloured, design-printed or otherwise decorated; or (iv) Covered on the face side with plaiting material, whether or not bound together in parallel strands or woven; (b) Borders and friezes, of paper, treated as above, whether or not in rolls, suitable for wall or ceiling decoration; (c) Wall coverings of paper made up of several panels, in rolls or sheets, printed so as to make up a scene, design or motif when applied to a wall. Products on a base of paper or paperboard, suitable for use both as floor coverings and as wall coverings, are to be classified in heading 48.23. 10.- Heading 48.20 does not cover loose sheets or cards, cut to size, whether or not printed, embossed or perforated.11.- Heading 48.23 applies, inter alia, to perforated paper or paperboard cards for Jacquard or similar machines and paper lace. 12.- Except for the goods of heading 48.14 or 48.21, paper, paperboard, cellulose wadding and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.