Rotary encoder

Rotary encoder harmonized system code

Product Overview A rotary encoder classified under HS Code 903180 is an electromechanical device designed to convert angular position or motion of a shaft or axle into an analog or digital signal. These encoders are precision instruments typically constructed with durable materials such as stainless steel or high-grade polymers, ensuring resilience and accuracy in industrial environments. Key physical specifications include shaft diameters ranging from 6 mm to 20 mm, resolution capabilities from 100 to over 10,000 pulses per revolution (PPR), and operating temperature ranges between -20°C to 85°C. Rotary encoders under this classification are processed with advanced optical or magnetic sensing technologies, delivering high fidelity feedback for motion control systems. The HS Code 903180 encompasses incremental and absolute encoders, subdivided by sensing principle and output type. Commercially, these devices are integral in sectors such as automated food packaging lines, retail inventory management systems, and industrial processing equipment requiring precise rotational measurement and control. Their value proposition lies in enhancing operational accuracy, reducing downtime, and ensuring compliance with industry performance standards. HS Code Classification & Trade Specifications The HS Code 903180 falls within Chapter 90 (Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus), specifically under Heading 9031, which covers “Measuring or checking instruments, appliances and machines, not specified elsewhere.” The subheading 903180 designates rotary encoders due to their function as measuring devices that provide positional information through angular displacement measurement. This classification is justified by the encoder’s primary role in measurement and control systems, differentiating it from other sensors or electrical apparatus. International trade handling of rotary encoders typically involves anti-static packaging, protective casing for sensitive optical components, and moisture-resistant sealing to preserve device integrity during transit. Shipping conditions often adhere to standardized protocols to maintain calibration accuracy, including temperature-controlled environments when necessary. Quality standards conform to ISO 9001 certification and IEC 60947-5-2 for electrical measuring instruments, ensuring compliance with WTO trade regulations and facilitating smooth customs clearance. The consistent use of this HS Code supports accurate tariff application and trade data reporting in global commerce.

Rotary encoder Chapter Note

1.- This Chapter does not cover : (a) Articles of a kind used in machines, appliances or for other technical uses, of vulcanised rubber other than hard rubber (heading 40.16), of leather or of composition leather (heading 42.05) or of textile material (heading 59.11); (b) Supporting belts or other support articles of textile material, whose intended effect on the organ to be supported or held derives solely from their elasticity (for example, maternity belts, thoracic support bandages, abdominal support bandages, supports for joints or muscles) (Section XI); (c) Refractory goods of heading 69.03; ceramic wares for laboratory, chemical or other technical uses, of heading 69.09; (d) Glass mirrors, not optically worked, of heading 70.09, or mirrors of base metal or of precious metal, not being optical elements (heading 83.06 or Chapter 71); (e) Goods of heading 70.07, 70.08, 70.11, 70.14, 70.15 or 70.17; (f) Parts of general use, as defined in Note 2 to Section XV, of base metal (Section XV) or similar goods of plastics (Chapter 39); however, articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences are to be classified in heading 90.21; (g) Pumps incorporating measuring devices, of heading 84.13; weight-operated counting or checking machinery, or separately presented weights for balances (heading 84.23); lifting or handling machinery (headings 84.25 to 84.28); paper or paperboard cutting machines of all kinds (heading 84.41); fittings for adjusting work or tools on machine-tools or water-jet cutting machines, of heading 84.66, including fittings with optical devices for reading the scale (for example, “optical” dividing heads) but not those which are in themselves essentially optical instruments (for example, alignment telescopes); calculating machines (heading 84.70); valves or other appliances of heading 84.81; machines and apparatus (including apparatus for the projection or drawing of circuit patterns on sensitised semiconductor materials) of heading 84.86; (h) Searchlights or spotlights of a kind used for cycles or motor vehicles (heading 85.12); portable electric lamps of heading 85.13; cinematographic sound recording, reproducing or re-recording apparatus (heading 85.19); sound-heads (heading 85.22); television cameras, digital cameras and video camera recorders (heading 85.25); radar apparatus, radio navigational aid apparatus or radio remote control apparatus (heading 85.26); connectors for optical fibres, optical fibre bundles or cables (heading 85.36); numerical control apparatus of heading 85.37; sealed beam lamp units of heading 85.39; optical fibre cables of heading 85.44; (ij) Searchlights or spotlights of heading 94.05; (k) Articles of Chapter 95; (l) Monopods, bipods, tripods and similar articles, of heading 96.20; (m) Capacity measures, which are to be classified according to their constituent material; or (n) Spools, reels or similar supports (which are to be classified according to their constituent material, for example, in heading 39.23 or Section XV).2.- Subject to Note 1 above, parts and accessories for machines, apparatus, instruments or articles of this Chapter are to be classified according to the following rules : (a) Parts and accessories which are goods included in any of the headings of this Chapter or of Chapter 84, 85 or 91 (other than heading 84.87, 85.48 or 90.33) are in all cases to be classified in their respective headings; (b) Other parts and accessories, if suitable for use solely or principally with a particular kind of machine, instrument or apparatus, or with a number of machines, instruments or apparatus of the same heading (including a machine, instrument or apparatus of heading 90.10, 90.13 or 90.31) are to be classified with the machines, instruments or apparatus of that kind; (c) All other parts and accessories are to be classified in heading 90.33. 3.- The provisions of Notes 3 and 4 to Section XVI apply also to this Chapter. 4.- Heading 90.05 does not apply to telescopic sights for fitting to arms, periscopic telescopes for fitting to submarines or tanks, or to telescopes for machines, appliances, instruments or apparatus of this Chapter or Section XVI; such telescopic sights and telescopes are to be classified in heading 90.13. 5.- Measuring or checking optical instruments, appliances or machines which, but for this Note, could be classified both in heading 90.13 and in heading 90.31 are to be classified in heading 90.31. 6.- For the purposes of heading 90.21, the expression “orthopaedic appliances” means appliances for : - Preventing or correcting bodily deformities; or - Supporting or holding parts of the body following an illness, operation or injury. Orthopaedic appliances include footwear and special insoles designed to correct orthopaedic conditions, provided that they are either (1) made to measure or (2) mass-produced, presented singly and not in pairs and designed to fit either foot equally. 7.- Heading 90.32 applies only to : (a) Instruments and apparatus for automatically controlling the flow, level, pressure or other variables of liquids or gases, or for automatically controlling temperature, whether or not their operation depends on an electrical phenomenon which varies according to the factor to be automatically controlled, which are designed to bring this factor to, and maintain it at, a desired value, stabilised against disturbances, by constantly or periodically measuring its actual value; and (b) Automatic regulators of electrical quantities, and instruments or apparatus for automatically controlling non-electrical quantities the operation of which depends on an electrical phenomenon varying according to the factor to be controlled, which are designed to bring this factor to, and maintain it at, a desired value, stabilised against disturbances, by constantly or periodically measuring its actual value.