Rubber tape Hs Code

Rubber tape harmonized system code

Product Overview Rubber tape classified under HS Code 401699 encompasses flexible strips made primarily of vulcanized rubber, designed for sealing, insulating, and protective applications. This product is characterized by its uniform thickness, typically ranging from 0.5 mm to 3 mm, and variable widths tailored to industrial specifications. Manufactured through calendaring or extrusion processes, the tape exhibits high tensile strength, elasticity, and resistance to abrasion, chemicals, and temperature fluctuations, ensuring durability in diverse environments. HS Code 401699 broadly includes rubber articles not specified elsewhere, with subcategories covering various fabricated rubber products excluding tires and inner tubes. In commercial contexts, rubber tape is extensively utilized in food processing and packaging for sealing containers, in retail for bundling and protective wrapping, and within industrial processing for insulation and vibration dampening. Its adaptability and compliance with food-grade and industrial safety standards position it as a cost-effective and reliable solution, facilitating seamless integration into supply chains requiring consistent quality and performance. HS Code Classification & Trade Specifications The HS Code 401699 falls under Chapter 40 – “Rubber and Articles Thereof,” with the heading 4016 denoting “Other articles of vulcanized rubber other than hard rubber.” The subheading 401699 specifically categorizes rubber products not classified under other specified subheadings, covering fabricated items such as rubber tape. This classification is based on the product’s material composition and its non-inclusion in narrower HS headings like hoses or belts. Trade compliance mandates packaging in moisture-resistant materials, often rolls wound onto cores, with preservation methods including anti-oxidant treatments to prevent degradation during transit. Standard shipping conditions require protection from excessive heat and UV exposure to maintain integrity. Quality standards align with ISO 9001 and relevant ASTM specifications for tensile strength (minimum 10 MPa) and elongation at break (above 300%), ensuring product consistency. Documentation must adhere to WTO agreements and customs protocols, facilitating accurate tariff classification, valuation, and regulatory compliance across international markets.

Rubber tape Chapter Note

1.- Except where the context otherwise requires, throughout the Nomenclature the expression “rubber” means the following products, whether or not vulcanised or hard : natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums, synthetic rubber, factice derived from oils, and such substances reclaimed. 2.- This Chapter does not cover : (a) Goods of Section XI (textiles and textile articles); (b) Footwear or parts thereof of Chapter 64; (c) Headgear or parts thereof (including bathing caps) of Chapter 65; (d) Mechanical or electrical appliances or parts thereof of Section XVI (including electrical goods of all kinds), of hard rubber; (e) Articles of Chapter 90, 92, 94 or 96; or (f) Articles of Chapter 95 (other than sports gloves, mittens and mitts and articles of headings 40.11 to 40.13). 3.- In headings 40.01 to 40.03 and 40.05, the expression “primary forms” applies only to the following forms : (a) Liquids and pastes (including latex, whether or not pre-vulcanised, and other dispersions and solutions); (b) Blocks of irregular shape, lumps, bales, powders, granules, crumbs and similar bulk forms. 4.- In Note 1 to this Chapter and in heading 40.02, the expression “synthetic rubber” applies to : (a) Unsaturated synthetic substances which can be irreversibly transformed by vulcanisation with sulphur into non-thermoplastic substances which, at a temperature between 18 C and 29 C, will not break on being extended to three times their original length and will return, after being extended to twice their original length, within a period of five minutes, to a length not greater than one and a half times their original length. For the purposes of this test, substances necessary for the cross-linking, such as vulcanising activators or accelerators, may be added; the presence of substances as provided for by Note 5 (B) (ii) and (iii) is also permitted. However, the presence of any substances not necessary for the cross-linking, such as extenders, plasticisers and fillers, is not permitted; (b) Thioplasts (TM); and (c) Natural rubber modified by grafting or mixing with plastics, depolymerised natural rubber, mixtures of unsaturated synthetic substances with saturated synthetic high polymers provided that all the above-mentioned products comply with the requirements concerning vulcanisation, elongation and recovery in (a) above. 5.- (A) Headings 40.01 and 40.02 do not apply to any rubber or mixture of rubbers which has been compounded, before or after coagulation, with : (i) vulcanising agents, accelerators, retarders or activators (other than those added for the preparation of pre-vulcanised rubber latex); (ii) pigments or other colouring matter, other than those added solely for the purpose of identification; (iii) plasticisers or extenders (except mineral oil in the case of oil-extended rubber), fillers, reinforcing agents, organic solvents or any other substances, except those permitted under (B); (B) The presence of the following substances in any rubber or mixture of rubbers shall not affect its classification in heading 40.01 or 40.02, as the case may be, provided that such rubber or mixture of rubbers retains its essential character as a raw material : (i) emulsifiers or anti-tack agents; (ii) small amounts of breakdown products of emulsifiers; (iii) very small amounts of the following : heat-sensitive agents (generally for obtaining thermosensitive rubber latexes), cationic surface-active agents (generally for obtaining electropositive rubber latexes), antioxidants, coagulants, crumbling agents, freeze-resisting agents, peptisers, preservatives, stabilisers, viscosity-control agents, or similar special-purpose additives.6.- For the purposes of heading 40.04, the expression “waste, parings and scrap” means rubber waste, parings and scrap from the manufacture or working of rubber and rubber goods definitely not usable as such because of cutting-up, wear or other reasons. 7.- Thread wholly of vulcanised rubber, of which any cross-sectional dimension exceeds 5 mm, is to be classified as strip, rods or profile shapes, of heading 40.08. 8.- Heading 40.10 includes conveyor or transmission belts or belting of textile fabric impregnated, coated, covered or laminated with rubber or made from textile yarn or cord impregnated, coated, covered or sheathed with rubber. 9.- In headings 40.01, 40.02, 40.03, 40.05 and 40.08, the expressions “plates”, “sheets” and “strip” apply only to plates, sheets and strip and to blocks of regular geometric shape, uncut or simply cut to rectangular (including square) shape, whether or not having the character of articles and whether or not printed or otherwise surface-worked, but not otherwise cut to shape or further worked. In heading 40.08 the expressions “rods” and “profile shapes” apply only to such products, whether or not cut to length or surface-worked but not otherwise worked.