Steel wire rod|HS Code

Steel wire rod harmonized system code

Product Overview Steel Wire Rod, classified under HS Code 7213, is a hot-rolled product from non-alloy or alloy steel, which is further processed into wire with various diameters. This product is defined by its distinct physical properties, which include a round cross-section, high tensile strength, and excellent surface quality. The rod's diameter can range from 5.5 to 16 millimeters, depending on the specific requirements of its end-use applications. HS Code 7213 is divided into several subcategories, with each representing different processing levels, such as whether the rod is simply hot-rolled (7213.10) or further treated by cold-drawing or cold-rolling (7213.20). Steel Wire Rods are primarily used in construction, automotive, and manufacturing industries for producing fasteners, springs, pre-stressed concrete and wire ropes. Its market positioning is defined by its versatility, durability, and affordability, making it a competitive choice for a wide range of industrial applications. HS Code Classification & Trade Specifications HS Code 7213, as per the Harmonized System, belongs to Chapter 72 (Iron and Steel), Heading 13 (Bar and Rod, hot-rolled, in irregularly wound coils, of iron or non-alloy steel). The full 6-digit code provides a detailed classification, with the first two digits indicating the chapter, the next two the heading, and the final two the subheading. This product is classified under this specific code due to its method of manufacture (hot-rolled) and form (in coils). To facilitate international trade, Steel Wire Rod is typically packaged in large, irregularly wound coils, secured with wire bands to prevent uncoiling during transit. Its preservation method involves coating the product with rust-inhibiting oil or other protective coating to ensure its quality during shipping. As for quality standards, Steel Wire Rod is subject to both national (such as ASTM standards in the US) and international (ISO) standards, ensuring its consistency, durability, and suitability for various applications. Compliance with these standards is crucial for successful customs clearance and adherence to international trade regulations.

Steel wire rod Chapter Note

1.- In this Chapter and, in the case of Notes (d), (e) and (f) throughout the Nomenclature, the following expressions have the meanings hereby assigned to them : (a) Pig iron Iron-carbon alloys not usefully malleable, containing more than 2 % by weight of carbon and which may contain by weight one or more other elements within the following limits : - not more than 10 % of chromium - not more than 6 % of manganese - not more than 3 % of phosphorus - not more than 8 % of silicon - a total of not more than 10 % of other elements. (b) Spiegeleisen Iron-carbon alloys containing by weight more than 6 % but not more than 30 % of manganese and otherwise conforming to the specification at (a) above. (c) Ferro-alloys Alloys in pigs, blocks, lumps or similar primary forms, in forms obtained by continuous casting and also in granular or powder forms, whether or not agglomerated, commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurising agents or for similar uses in ferrous metallurgy and generally not usefully malleable, containing by weight 4 % or more of the element iron and one or more of the following : - more than 10 % of chromium - more than 30 % of manganese - more than 3 % of phosphorus - more than 8 % of silicon - a total of more than 10 % of other elements, excluding carbon, subject to a maximum content of 10 % in the case of copper.(d) Steel Ferrous materials other than those of heading 72.03 which (with the exception of certain types produced in the form of castings) are usefully malleable and which contain by weight 2 % or less of carbon. However, chromium steels may contain higher proportions of carbon. (e) Stainless steel Alloy steels containing, by weight, 1.2 % or less of carbon and 10.5 % or more of chromium, with or without other elements. (f) Other alloy steel Steels not complying with the definition of stainless steel and containing by weight one or more of the following elements in the proportion shown : - 0.3 % or more of aluminium - 0.0008 % or more of boron - 0.3 % or more of chromium - 0.3 % or more of cobalt - 0.4 % or more of copper - 0.4 % or more of lead - 1.65 % or more of manganese - 0.08 % or more of molybdenum - 0.3 % or more of nickel - 0.06 % or more of niobium - 0.6 % or more of silicon - 0.05 % or more of titanium - 0.3 % or more of tungsten (wolfram) - 0.1 % or more of vanadium - 0.05 % or more of zirconium - 0.1 % or more of other elements (except sulphur, phosphorus, carbon and nitrogen), taken separately. (g) Remelting scrap ingots of iron or steel Products roughly cast in the form of ingots without feeder-heads or hot tops, or of pigs, having obvious surface faults and not complying with the chemical composition of pig iron, spiegeleisen or ferro-alloys. (h) Granules Products of which less than 90 % by weight passes through a sieve with a mesh aperture of 1 mm and of which 90 % or more by weight passes through a sieve with a mesh aperture of 5 mm. (ij) Semi-finished products Continuous cast products of solid section, whether or not subjected to primary hot-rolling; and Other products of solid section, which have not been further worked than subjected to primary hotrolling or roughly shaped by forging, including blanks for angles, shapes or sections. These products are not presented in coils. (k) Flat-rolled products Rolled products of solid rectangular (other than square) cross-section, which do not conform to the definition at (ij) above in the form of : - coils of successively superimposed layers, or - straight lengths, which if of a thickness less than 4.75 mm are of a width measuring at least ten times the thickness or if of a thickness of 4.75 mm or more are of a width which exceeds 150 mm and measures at least twice the thickness. Flat-rolled products include those with patterns in relief derived directly from rolling (for example, grooves, ribs, chequers, tears, buttons, lozenges) and those which have been perforated, corrugated or polished, provided that they do not thereby assume the character of articles or products of other headings.Flat-rolled products of a shape other than rectangular or square, of any size, are to be classified as products of a width of 600 mm or more, provided that they do not assume the character of articles or products of other headings. (l) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods). (m) Other bars and rods Products which do not conform to any of the definitions at (ij), (k) or (l) above or to the definition of wire, which have a uniform solid cross-section along their whole length in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). These products may : - have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods); - be twisted after rolling. (n) Angles, shapes and sections Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire. Chapter 72 does not include products of heading 73.01 or 73.02. (o) Wire Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of flat-rolled products. (p) Hollow drill bars and rods Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 73.04. 2.- Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight. 3.- Iron or steel products obtained by electrolytic deposition, by pressure casting or by sintering are to be classified, according to their form, their composition and their appearance, in the headings of this Chapter appropriate to similar hot-rolled products.