Thermal imaging camera Hs Code

Thermal imaging camera harmonized system code

Product Overview The thermal imaging camera classified under HS Code 902580 is an advanced electronic device designed to detect and visualize infrared radiation emitted by objects, converting thermal energy into a visible image. This device typically features a compact, ergonomic design with high-resolution infrared sensors capable of temperature detection ranges from -20°C to 1200°C, depending on the model. Processing capabilities include real-time image rendering, digital signal processing (DSP), and integration with software platforms for enhanced image analysis. Quality attributes emphasize sensor sensitivity, calibration accuracy, and durability under varied environmental conditions. Under HS Code 902580, thermal imaging cameras fall within subcategories that distinguish them by application specificity—such as handheld devices, fixed-mount units, and integrated systems. Commercially, these cameras are critical in food service for temperature verification to ensure food safety compliance, in retail environments for energy audits and security, and across processing industries for equipment monitoring and preventive maintenance. Their market positioning is defined by precision, reliability, and compliance with international standards, offering competitive advantages in accuracy and operational efficiency. HS Code Classification & Trade Specifications The product is classified under HS Code 902580, fully structured as Chapter 90 (Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus), Heading 25 (Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter), and Subheading 80 (Other instruments and appliances, specified as thermal imaging cameras). This classification is based on the device's primary function of non-contact temperature measurement via infrared detection, distinguishing it from conventional optical instruments. Trade considerations for thermal imaging cameras include packaging in anti-static, shock-absorbent materials to prevent sensor damage during transit, and preservation of calibration integrity through humidity-controlled environments. Shipping protocols comply with international regulations governing electronic devices, including adherence to the WEEE directive for environmental safety. Quality standards conform to ISO 9001 for manufacturing processes and IEC 60825 for laser safety where applicable. Compliance with WTO agreements ensures harmonized tariff treatments and facilitates seamless customs clearance, supporting trade professionals in accurate documentation and classification.

Thermal imaging camera Chapter Note

1.- This Chapter does not cover : (a) Articles of a kind used in machines, appliances or for other technical uses, of vulcanised rubber other than hard rubber (heading 40.16), of leather or of composition leather (heading 42.05) or of textile material (heading 59.11); (b) Supporting belts or other support articles of textile material, whose intended effect on the organ to be supported or held derives solely from their elasticity (for example, maternity belts, thoracic support bandages, abdominal support bandages, supports for joints or muscles) (Section XI); (c) Refractory goods of heading 69.03; ceramic wares for laboratory, chemical or other technical uses, of heading 69.09; (d) Glass mirrors, not optically worked, of heading 70.09, or mirrors of base metal or of precious metal, not being optical elements (heading 83.06 or Chapter 71); (e) Goods of heading 70.07, 70.08, 70.11, 70.14, 70.15 or 70.17; (f) Parts of general use, as defined in Note 2 to Section XV, of base metal (Section XV) or similar goods of plastics (Chapter 39); however, articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences are to be classified in heading 90.21; (g) Pumps incorporating measuring devices, of heading 84.13; weight-operated counting or checking machinery, or separately presented weights for balances (heading 84.23); lifting or handling machinery (headings 84.25 to 84.28); paper or paperboard cutting machines of all kinds (heading 84.41); fittings for adjusting work or tools on machine-tools or water-jet cutting machines, of heading 84.66, including fittings with optical devices for reading the scale (for example, “optical” dividing heads) but not those which are in themselves essentially optical instruments (for example, alignment telescopes); calculating machines (heading 84.70); valves or other appliances of heading 84.81; machines and apparatus (including apparatus for the projection or drawing of circuit patterns on sensitised semiconductor materials) of heading 84.86; (h) Searchlights or spotlights of a kind used for cycles or motor vehicles (heading 85.12); portable electric lamps of heading 85.13; cinematographic sound recording, reproducing or re-recording apparatus (heading 85.19); sound-heads (heading 85.22); television cameras, digital cameras and video camera recorders (heading 85.25); radar apparatus, radio navigational aid apparatus or radio remote control apparatus (heading 85.26); connectors for optical fibres, optical fibre bundles or cables (heading 85.36); numerical control apparatus of heading 85.37; sealed beam lamp units of heading 85.39; optical fibre cables of heading 85.44; (ij) Searchlights or spotlights of heading 94.05; (k) Articles of Chapter 95; (l) Monopods, bipods, tripods and similar articles, of heading 96.20; (m) Capacity measures, which are to be classified according to their constituent material; or (n) Spools, reels or similar supports (which are to be classified according to their constituent material, for example, in heading 39.23 or Section XV).2.- Subject to Note 1 above, parts and accessories for machines, apparatus, instruments or articles of this Chapter are to be classified according to the following rules : (a) Parts and accessories which are goods included in any of the headings of this Chapter or of Chapter 84, 85 or 91 (other than heading 84.87, 85.48 or 90.33) are in all cases to be classified in their respective headings; (b) Other parts and accessories, if suitable for use solely or principally with a particular kind of machine, instrument or apparatus, or with a number of machines, instruments or apparatus of the same heading (including a machine, instrument or apparatus of heading 90.10, 90.13 or 90.31) are to be classified with the machines, instruments or apparatus of that kind; (c) All other parts and accessories are to be classified in heading 90.33. 3.- The provisions of Notes 3 and 4 to Section XVI apply also to this Chapter. 4.- Heading 90.05 does not apply to telescopic sights for fitting to arms, periscopic telescopes for fitting to submarines or tanks, or to telescopes for machines, appliances, instruments or apparatus of this Chapter or Section XVI; such telescopic sights and telescopes are to be classified in heading 90.13. 5.- Measuring or checking optical instruments, appliances or machines which, but for this Note, could be classified both in heading 90.13 and in heading 90.31 are to be classified in heading 90.31. 6.- For the purposes of heading 90.21, the expression “orthopaedic appliances” means appliances for : - Preventing or correcting bodily deformities; or - Supporting or holding parts of the body following an illness, operation or injury. Orthopaedic appliances include footwear and special insoles designed to correct orthopaedic conditions, provided that they are either (1) made to measure or (2) mass-produced, presented singly and not in pairs and designed to fit either foot equally. 7.- Heading 90.32 applies only to : (a) Instruments and apparatus for automatically controlling the flow, level, pressure or other variables of liquids or gases, or for automatically controlling temperature, whether or not their operation depends on an electrical phenomenon which varies according to the factor to be automatically controlled, which are designed to bring this factor to, and maintain it at, a desired value, stabilised against disturbances, by constantly or periodically measuring its actual value; and (b) Automatic regulators of electrical quantities, and instruments or apparatus for automatically controlling non-electrical quantities the operation of which depends on an electrical phenomenon varying according to the factor to be controlled, which are designed to bring this factor to, and maintain it at, a desired value, stabilised against disturbances, by constantly or periodically measuring its actual value.